Home > Light Testing Equipment >

IEC60598-1 Clause 4.4.4 Fluorescent Lamp Holder Axial Force Tester / Lighting And Luminaries Test Equipment

Product Categories

Battery Testing Machine [45]
Lamp Cap Gauge [84]
Test Equipment [9]
IP Testing Equipment [73]
IEC62368 Test Equipment [88]
Environmental Test Chamber [76]
Medical Test Equipment [90]
Flame Test Equipment [34]
Light Testing Equipment [47]
Test Finger Probe [71]
Plug Socket Tester [152]
Electrical Safety Test Equipment [173]
Cable Testing Equipment [51]
Reference Materials [5]
Dust Test Chamber [21]
Image Measuring Machine [8]
Electric Motor Testing System [17]
Six Axis Robot [25]
Audio Analyzer [13]

KingPo Technology Development Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

IEC60598-1 Clause 4.4.4 Fluorescent Lamp Holder Axial Force Tester / Lighting And Luminaries Test Equipment

Name: IEC605981 Clause 444 Fluorescent Lamp Holder Axial Force Tester Lighting And Luminaries Test Equipment
Brand: Kingpo
Price: 1 USD

Best IEC60598-1 Clause 4.4.4 Fluorescent Lamp Holder Axial Force Tester / Lighting And Luminaries Test Equipment wholesale

Brand Name : Kingpo

Certification : Calibration Certificate

Place of Origin : China

MOQ : 1

Price : To be quoted

Payment Terms : T/T

Supply Ability : 50 set/ month

Packaging Details : safety carton pack or plywood box

Power : 220V 50Hz

axial force : 15N (bar weight), 30N (superimposed by a 15N vias weight onto the bar)

Fixtures : V-type fixture, front and back adjustable

Holding specimen height range : 0-250mm

Contact Now

IEC60598-1 clause 4.4.4 Fluorescent Lamp Holder Axial Force Tester / Lighting and Luminaries Test Equipment

Product information:

The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4 standard test item requirements, test content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time I minutes, then quit, deformation detection lamp holder shall not exceed the amount of light foot length of 1 / 4.

It relates to an axial force testing device for a fluorescent lamp holder. The axial force testing device is characterized by comprising a base, wherein a test seat for positioning the lamp holder is arranged in the middle of the base, one side of the test seat is provided with a range finder, the other side of the test seat is provided with a linear guide rail, a thrust seat is installed on a sliding block of the linear guide rail, a pressure sensor and a test pressure head are installed on the thrust seat, and a stepping motor is connected with the thrust seat through a screw rod and a screw rod nut.

Technical parameters:

Power	220V 50Hz
The axial force	15N (bar weight), 30N (superimposed by a 15N vias weight onto the bar)
Fixtures	V-type fixture, front and back adjustable
Holding specimen height range	0-250mm

Product Tags:

led testing equipment

led lamp testing equipment

IEC60598-1 Clause 4.4.4 Fluorescent Lamp Holder Axial Force Tester / Lighting And Luminaries Test Equipment Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	KingPo Technology Development Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!